Belkin F5D6231-4 - Wireless Cable/DSL Gateway Router Manuale Utente Scaricare il pdf (Pagina 73)

MANUALLY CONFIGURING NETWORK SETTINGS

3. Select “Built-in Ethernet” (2) next to “Show in the Network menu.

4. Select the “TCP/IP” tab (3). Next to “Configure” (4), you should see

“Manually” or “Using DHCP”. If you do not, check the PPPoE tab (5) to

make sure that “Connect using PPPoE” is NOT selected. If it is, you will

need to configure your Router for a PPPoE connection type using your

user name and password.

5. If “Manually” is selected, your Router will need to be set up for a static

IP connection type. Write the address information in the table below. You

will need to enter this information into the Router.

6. If not already selected, select “Using DHCP” next to “Configure” (4),

then click “Apply Now”.

Your network settings are now configured for use with the Router.

(2)

(3)

(4)

(5)

P74122_F5D6231-4_man.qxd 11/6/02 1:04 PM Page 71

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 82 83

Nessun commento

Belkin F5D6231-4 - Wireless Cable/DSL Gateway Router Manuale Utente Pagina 73