Belkin Next Net Series Manuale Utente Scaricare il pdf (Pagina 13)

Network Setup

- p13

STEP-5 Using Static IP Address

If you have Static IP address, please skip step one

Here is the DSL setup Quick check list without it your remote view

will not work;

1- Make sure your DSL Router/Modem is bridged, if your DSL

modem/router not bridged you have two routers back to back

and your remote view will not work.

2- Make sure the connection type setup in your Router is set to

PPOE if it is not & you have internet connection that mean

your DSL Modem/router is not bridged correctly and your

Network remote view will not work.

3- Make sure the Router port forwarding is set correctly and is

active with the same port number as the DVR ( under HTTP

setup) with the same IP address as the one you had assign to

your DVR if you are off by one number or one zero your

remote view will not work.

4- Make sure the DVR Network is set to LAN and the IP address

match the port forwarding IP in your Router and the Gateway

match he IP address to the Router itself.

5- Make sure HTTP server is enabled (under network) and the

port number matches the port number range in the port

forwarding in the router.

Skipping any of the listed steps will result in your DVR not been

viewable on line

If you still have any question regarding connecting your DVR to

the Internet and you cannot find the answer you need in this

guide, please consult a network specialist for assistance.

1 2 ... 8 9 10 11 12 13

Nessun commento

Belkin Next Net Series Manuale Utente Pagina 13